PD2127 12.7mm x 3.1mm Square Bumper Stops 200 Per Sheet
£6.46 Excl. VAT
PD2127 12.7mm x 3.1mm square bumper stops are high quality pieces of protective equipment that are perfect for keeping your surfaces safe against potential damage. They are manufactured using high quality polyurethane that have a few distinct advantages over similar products.
They are abrasion resistant, oil and solvent resistant, weather-resistant and heat and cold resistant. They have amazing load bearing capacity, as well as high tear resistance which is much higher than similar rubber products. The 12.7mm x 3.1mm square bumper stops are supplied in sheets with 200 on a sheet
Please call if you would like to discuss bulk pricing options
Order By 2pm For Next Day Delivery
Mon - Fri UK Mainland Only For destinations outside of the UK please contact us prior to placing your order.
Bumperstop Ref: PD2127
PD2127 Square Clear BumperStop is a genuine branded BumperStop which measures 12.7mm in diameter by 3.1mm in height. There are 200 Square Clear BumperStops to a sheet and 50 sheets to a box (total of 10,000 Square Clear BumperStops in a box).
Fosseway Tapes stock Bumper stops in a large range of shapes and sizes; for further information please contact us on: 0800 652 1056 and we will happily help you with your Bumperstop requirements.
Made from Polyurethane
As these stick on feet are made from polyurethane they have several distinct advantages over similar self adhesive feet made from inferior materials. These advantages are:
Oil and solvent resistant
Higher load bearing capacity than conventional rubber
Higher Tear resistant than rubber – between 500-100 Ibs./linear inch
Excellent noise dampening properties
Electrical insulating properties
Heat and cold resistant
The PD2127 is perfect due to its sound dampening stops and buffers as they reduce noise and absorb shock. These Bumperstops can also be be used under glass to prevent the glass slipping when used in conjunction with most glass top furniture.
Stick on feet
Our Recessed Cone Bumper Stops are self adhesive feet which have a self adhesive back to allow for them to be stuck onto a range of products without the need to use fixings such as screws or additional glue.
Non slip feet for Electronic and Medical Devices
Our Bumperstops can be used as non-slip feet - or spacers - on all manner of audio, medical, telecoms and general desktop units. This gives you the added advantage of extra heat dissipation when your electronic or medical unit gets hot.
Owing to their clarity, these BumperStop Protectors can be used under a huge variety of acrylic counter display units to help to prevent sliding. When used under coloured displays they will blend nicely with the colour of the unit.
These Bumperstops can be used as non-slip spacers under glass to prevent glass from moving; and to take up any shock and vibration. These can also be used on kitchen chopping boards, drinks coasters and glass top furniture in hotels and homes.
These Bumperstops can help to stabilize and prevent appliances from slipping or rocking and are ideal for added heat dissipation. Compared to similar products made from commercial grades of rubber these Bumperstops will not mark the surface on which it sits as they are made from polyurethane.
These Bumperstops can be used to prevent squeaks, rattles, noise and vibration within many sectors of the automotive industry.
Load tolerance: 5Kg per BumperStop
Hardness (shore A): ASTN D-2240
Tensile Strength (Mpa): BS903
Elongation (%): BS903
Tear Strength (KN/m): BS903
Abrasion Resistance (MG loss): BS EN 5470-1:1999
Flame Retardency: UL94HB
Kinetic Coefficient of friction: ASTM D-1894-78
Not sure if this Bumperstop is correct for your requirements?
Fosseway Tapes stock Bumper Stops in a large range of shapes and sizes. If you are not sure if this Bumperstop is right for your requirements please contact us on: 0800 652 1056 and we will happily help you with your Bumperstop requirements.
To Discuss Your Order Or Any Other Enquiries Call Us On 0800 652 1054Get In Touch