Spray Adhesive Starter Kit – 22Kg TensorGrip L40 | 12FT Hose & Spray Glue Gun

£390.00 Inc. VAT

This spray adhesive is ideal for use on: Wood, Metals, Rubber, Fabric, Most plastics, Cardboard, Polythene, Concrete and Decorative laminates.

 

Please Note: We can only ship this product to locations in mainland UK on a Two / Three day service  

Qty:
Download PDF Download Data Sheet

Order By 2pm For Next Day Delivery

Mon - Fri UK Mainland Only For destinations outside of the UK please contact us prior to placing your order.

Fosseway Tapes’s Tuckbond Spray Adhesive pots are a low odor, high quality spray adhesive that is CFC free. This adhesive was developed to bond to a wide variety of substrates and has an excellent grab and a long open time. This spray adhesive is delivered through a hose and spray gun system, which means application is clean and efficient. After use the spray gun is locked off and the system remains ready for instant re-use.
  • Product Use

    Fosseway Tapes Tuskbond will bond a wide variety of substrates including:

    Wood

    Metals

    Rubber

    Fabric

    Most plastics

    Cardboard

    Polythene

    Concrete

    Decorative laminates

    This spray adhesive can also be used to bond expanded polystyrene when forming a bond to a different substrate. In this instance the product should be used as a one-way stick and only applied to the opposite substrate (do not spray onto the expanded polystyrene).


    Ideal for:

    This adhesive is ideal for permanent bonds which require a good initial bond strength. It provides good temperature resistance and - if protected from contamination - has an open time of several hours.

    Please note you should always test a small sample of the materials first to ensure the suitability of the product for the application. For instance, some vinyls contain large amounts of plasticizer which, over time, can migrate and soften the bond. When in doubt, test first.


    Composition / information on ingredients

    IngredientCASEINECSContents %Health (Class)Risk (R Phrases)
    Butane / Isobutante106-97-8203-448-720-30F+R12
    Propane74-98-6200-827-920-30F+R12
    Dichloromethane75-09-2200-838-935-50XnR40

    Hazards identification information:

    Pressurised Container

    Extremely flammable. May form a flammable or explosive mixture with air during use. Contains a Category 3 carcinogen. Limited evidence of a carcinogenic effect.

    Solvent abuse can kill instantly.


    First aid measures:

    General:

    Move the exposed person to fresh air at once.

    Eye’s:

    Promptly wash eyes with lots of water while lifting the eyelids. Continue to rinse for at least 15 minutes and get medical attention

    Inhalation:

    Move the exposed person to fresh air at once. Perform artificial respiration if breathing has stopped. Keep the affected person warn and at rest. Get prompt medical attention.

    Ingestion:

    Rinse mouth thoroughly. Do not induce vomiting. Get medical attention immediately


    Fire fighting measures:

    Extinguishing Media:

    Water spray, fog or mist , Carbon dioxide (CO2), foam

    Special Fire Fighting Procedures:

    Water may be ineffective but use to keep fire-exposed containers cool. If a leak or spill has not ignited, use water spray to disperse vapours and protect men stopping the leak. Water spray may be used to flush spills away and dilute spills to non-flammable mixtures. Use water spray to reduce vapours. Warn fire fighters that pressurised containers are involved.

    Unusual Fire & Explosion Hazards:

    Makes explosive mixtures with air. Extremely flammable. May explode in a fire. May travel considerable distance to source of ignition and flash back.


    Accidental Release Measures:

    Spill Cleanup Methods:

    Extinguish all ignition sources. Provide ventilation. Avoid sparks, flames, heat and smoking. Ventilate. Absorb in vermiculite, dry sand or earth and place into containers. Collect and reclaim or dispose in sealed containers in licensed waste.


    Handling and Storage Information:

    Usage Precautions:

    Keep away from heat, sparks and open flame. Read and follow manufacturer's recommendations. Do not spray near a naked flame or any incandescent material.

    Storage Precautions:

    Flammable/combustible Store at moderate temperatures in dry, well ventilated area. Keep away from heat, sparks and open flame. Protect from sunlight and do not expose to temperatures exceeding 50°C.

    Ventilation:

    No specific ventilation requirements noted, except this product must not be used in a confined space without good ventilation. If, following workplace assessment, OEL is likely to be exceeded due to use where natural ventilation is insufficient suitable respirator with organic vapour cartridge must be worn.

    Skin Protection:

    Wear suitable gloves, PVC, if skin contact is likely. Protective clothing with elasticated cuffs. PVC boots.

    Eye Protection:

    Wear splash-proof eye goggles to prevent any possibility of eye contact.

    General:

    Do not smoke when using this product.


    Exposure Controls and Personal Protection:

    IngredientCAS No.EINECSSTDL.T. (8 Hr.TWA)S.T. (15 MIN)
    Dichloromethane75-09-2200-838-9MEL100 ppm (Sk)300 ppm (Sk)
    Propane74-98-6200-827-9 AsphyxiatingAsphyxiatingBmgv.
    Butane / Isobutane106-97-8203-448-7OES600 ppm750 ppm
    BMGV. = Biological Monitoring Guidance Value listed in EH40

    Physical and chemical properties

    Appearance:

    Pressurised container containing a mixture of active ingredients, solvents and propellants.

    Odour:

    solvent

    Physical Data Comments:

    A Flash Point method is not available for aerosols but the major hazardous component, the propellant, has a Flash Point of <-40°C with Flammability limits of 9.5% vol. Upper and 1.8%vol Lower. Auto-ignition temperature is 410/580°C.


    Stability and Reactivity Information

    Stability:

    Highly volatile

    Conditions to avoid:

    Avoid heat, flames and other sources of ignition.


    Disposal Information:

    Disposal Methods:

    After use ensure that the container is empty and pierce through the disc near the neck prior to disposal. Dispose of in accordance with all local, regional, national and EC Regulations.


    Transport Information:

    Road (GB):Road (ADR):
    Mark:Liquefied Gas, Flammable NOS, UN3161,Class2, Div. 2.1 3161, Liquefied Gas, Flammable NOS, 2°F, ADR
    Label for Conveyance:Flammable Gas (Class 2)Label Model Number 3, Flammable.

    Not sure if this spray adhesive is right for your requirements?

    If you are not sure if this spray adhesive pot is right for your requirements please do not hesitate to contact our friendly sales team on: 0800 652 1054, and we will be happy to assist you.

    Request A Free Sample

    Fill out the form below to request your free sample.

    To Discuss Your Order Or Any Other Enquiries Call Us On 0800 652 1054

    Get In Touch