VELCRO® Brand Tape Self – Adhesive 25m
From: £9.54 Inc. VAT
Ideally for use with / on:
- – Rowing machines
- – Walls
- – Exhibitions
- – Point of Sale
- – Other industrial industries
- – Low energy surfaces
- – Polystyrene
- – Acetyl
- – PVA (polyvinyl acetate)
- – Polypropylene
- – Teflon
|Buy in Bulk & Save - Number of Units||Discount / Price / Unit|
|1 - 4||0% £9.54|
|5 +||5% £9.06|
Order By 2pm For Next Day Delivery
Mon - Fri UK Mainland Only For destinations outside of the UK please contact us prior to placing your order.
This Hook & Loop Self Adhesive VELCRO® Brand tape, have a general-purpose adhesive that is recommended for smooth surfaces, and for indoor or outdoor use. This adhesive also makes them extremely easy to apply and use.
Watch this Velcro Tape in action
This VELCRO® Brand tape is supplied in rolls that are easily stored and give you the flexibility to cut the length you require. This VELCRO® Brand tape uses PS-14 General Adhesive – which is a rubber-based adhesive – offering a good tack.
This makes it ideal for use on items such as: rowing machines, walls and in the Exhibition & Point of Sale, other industrial industries, as well as making this VELCRO® Brand product perfect for use on low energy surfaces; including Polystyrene, Acetyl, PVA (polyvinyl acetate) or Polypropylene & Teflon.
How to use this Velcro tape
When you use these VELCRO® Brand tapes it is as simple to peel away the release paper and press down the adhesive into place. Please see the application instructions further down for more information.
Preparation of the VELCRO® Brand Tapes
Pointed corners on VELCRO® Brand Hook and Loop Tapes are sometimes detrimental to a good bond. We recommend nipping or rounding each corner of the VELCRO® Brand Tape to eliminate this vulnerable area.
Your plant conditions
Your work area must be clean and free from dirt and dust in the air. It is also essential to have a well ventilated area when using solvent activated adhesives. Ideal room temperatures should be 18°C to 20°C, and relative humidity 40% to 60% (the lower the humidity, the better the bond).
If the adhesive is applied below the recommended application temperatures, it loses tack. Once adhesive or self-adhesive tape is applied, press it firmly into contact with the substrate to smooth tape and to avoid air bubbles.
It is mandatory that all surfaces should be thoroughly cleaned and dried. All cleaning agents should be tested prior to use to ensure cleaning agent will have no adverse effects on the substrate.
This type of surface is one that requires a primer or sealer to provide a suitable bonding area. This could consist of a coating or a liquid adhesive. Allow to dry prior to final adhesive procedure.
This would be suitable for solvent activation of a VELCRO® Brand pre-coated adhesive backing tape. Better adhesion can be obtained when used with a liquid adhesive.
Superior bonding can be achieved by cleaning or roughing up a smooth surface.
Not recommended for use in water or on plastics with high concentrations of plasticizers. Adhesives are not washable or dry cleanable.
Before using adhesives for production user should test the adhesive to determine the suitability of the product for the intended use.
|Base Material||Rubber Resin|
|Temperature Range||-15°C to +90°C|
(curing time: 24 hours) Method: FTM 1 (FINAT*)
|Static Shear Method: FTM 8 (FINAT*)||≥7 days|
|Tack||Medium / Low|
|Application||General except PVC|
|Special features||High cohesion under temperature|
Velcro self adhesive price
If you buy this adhesive tape in bulk it can cost from only 36p / metre.
Not sure if these stick on feet are right for your requirements?
If you are not sure if this double sided tape is correct for your requirements please contact us to discuss your requirements and we can point you in the right direction.
To Discuss Your Order Or Any Other Enquiries Call Us On 0800 652 1054Get In Touch